CAM 的技术及产品


阅读全文

改善各直流马达车间

提供超长使用寿命、高质量及可靠性的马达设备。

通过有效生产方式及先进技术,降低马达成本。

通过使用更先进的生产线及工具,减少马达生产时间。

 

有任何问题?

请马上联系我们!

Armature Seasoning

Automatic Control, Smart Design, Precise Alignment

CAM’s TA Seasoning Machine heats and rotates a heavy traction motor armature at high speeds. It enables a motor shop to simulate the motor’s commutator operating conditions by heating and spinning the armature.

Data Reporting
The temperature of each cycle is recorded. A data logger with a graphic display screen is accessed from the machine’s main operator control panel. Process data can be outputted via a USB port so that a commutator seasoning history can be established for each armature.


Efficient, Safe Heating
TA Seasoners can be equipped with gas heating elements or electric tubular heating elements. Baffle Plates are used to contain the heat in the Commutator area for greater efficiency. The Baffle Plates are customized to fit each different sized armature. Safety interlock circuits prevent the application of heat unless the armature is rotating at a minimal speed to avoid creating hot spots in the surface of the Commutator.

 

Designed for Safety
Just like the rest of CAM’s equipment line, our TA Seasoning Machine has been designed to be safe to operate and easy to use.

  • Vibration sensors monitor the spinning armature and are programmed to shut the machine down if the vibration rate exceeds a preset limit.
  • Armature support Bearings are protected by temperature sensors that shut down the machine if they get too hot.
  • Support pedestals are line bored true to each other so alignment is perfect.
  • Heavy-duty protective shield covers the entire rotating armature to hold loose particles inside.
  • A heavy-duty machine bed has the mass to stay stiff and accurate. Machined V- way and Flat-way ensure the alignment of the bearing pedestals.
  • Programmable Automatic Cycle Controls allow you to produce the same cycle conditions every time. And, the proportional heat control will ensure that you do not overheat the commutator.
  • Variable speed drive is controlled by a PLC with a drive tachometer.
  • Hydraulically opened guard saves time. It is interlocked to the drive for safety.

The Market’s Choice – Nobody Sells More Seasoning Machines than CAM
Put our expertise to work in your shop and start realizing the economic,
practical and proven value of a CAM Seasoning Machine today!

DMC Firewall is developed by Dean Marshall Consultancy Ltd