The SCZ Automatic Forming Machine
is a CNC machine that automatically
opens the loop to a finished diamond
coil.

Forms both Taped Flat Coils and
Traditional Coils without tape

In addition to forming taped, D-shaped
or diamond shaped flat coils, it can be
used to form traditional coils without
tape. It produces high quality,
repeatable results and the consistency
of the coils makes them easier to wind
into a stator.

The machine is recipe driven and
requires minimal, inexpensive coil
tooling. An unlimited number of coil
forming recipes can be stored and
recalled to speed machine set-up.

Servo motors spread the coils, form
the slot angles and provide the lift for
the slot height and knuckle height. The
servo motor controlled drive system
provides consistent, accurate and
repeatable results.

Solid, strong hydraulic power is used
for clamping the coil, forming the
knuckle angle and most importantly arc
forming the coil legs. Automatic arms
push the legs to create the arcs.

Makes Every Coil in a Set Identical!

Spreads in less than 30 seconds!

Accurate leg radius forming every time without hammering!
o Most manual adjustments of the coil are eliminated.

Each coil precisely shaped for easy nesting during winding
o Reduces winding time
o Eliminates tedious and difficult reforming and rework

Computer control for simple set-up
o Stores set-up data for many different coil profiles

o Provides complete process monitoring and performance feed-back for better quality control

Produces a Perfectly Matched Set of Stator Coils in minutes!

Step 1 – Select the preprogrammed coil
loop and finished coil specifications from the system’s computer.
Step 2 – Place the loop in the machine.
Step 3 – Push the start button.